| 1 | Research "HVAC" | Added to the Vanilla Expanded tab. Prerequisites: Air Conditioning Research, Hi-Tech Research Bench, 1000pt | ResearchProjects_Various.xml (VTE_HVAC) |
| 2 | AC control unit | 2x2. Set the target temperature for the entire network using the ±1/±10 buttons and reset (initial 21°C). An efficiency bar appears above the building (with a 3-stage color indicator). Power 200W, Steel 80, Components 6, Silver 100, Construction 8 | Building_AcControlUnit、CompResourceSingleton |
| 3 | AC unit / Wall-mounted AC unit | A 1-tile device embedded in the wall. Automatically switches between cooling and heating (no heat exhaust side) according to the room temperature. Maximum temperature 120°C. Power 100W | Building_AcUnit、CompAcTempControl |
| 4 | AC compressor / Large AC compressor | For outdoor use only. Stops when under a roof. Provides +2/+6 efficiency (large is 2x2) | CompResourceTrader_Compressor |
| 5 | Air duct / Subterranean air duct / Air duct valve | Pipe net that can be laid with Steel 1. Flow can be opened and closed with a valve (colonists must go to operate it). Has a duct net-specific overlay display. When damaged, it produces dirt. | ACNet.xml (PipeNetDef VTE_EfficiencyNet, CompProperties_SpillWhenDamaged) |
| 6 | Network efficiency | Calculated as supply (2 per unit + compressors) minus use (1 per AC unit). Each 1 of shortage gives −5%, each 1 of surplus gives +1%, up to 150%. Power use is "base × (2 − efficiency)", so a surplus lowers the power bill (half at 150%). If efficiency reaches 0%, the whole network stops. | AcPipeNet.CalculateEfficiency、Building_AcUnit.TickRare |
| 7 | Error display | "Not enough compressors", "No control unit", "2 or more control units" and "Under a roof" show up as a blinking icon with an explanation. | CompResourceTrader_AC / _Compressor(Overlay_*) |
| 8 | Link / Unlink temperature | Each AC unit can be excluded from the network temperature and have its temperature set individually. | CompAcTempControl.IndependentTemp |
| 9 | Industrial heater | A 2x1 wall-mounted heater. Power 250 W. 63/s per output cell, and it pushes heat into each of its 2 cells, so 126/s per heater (6 times the vanilla heater's 21). It can heat up to 1000℃ (vanilla levels off at around 120℃). Research: electricity only. | Building_TwoCellHeater (maxTemperature 1000) |
| 10 | Industrial cooler | A large 2x1 cooler. One side blows cold air, the other side vents heat. −63/s per output cell, and it works on each of its 2 pairs, so −126/s per cooler (6 times the vanilla cooler's −21). Power 300 W. Made for freezers. | Building_TwoCellCooler |
| 11 | Wall heater / Wall-mounted heater (built-in wall heater / wall-mounted heater) | A heater that attaches to the wall. 175W, 21/second. A tile that emits warm air is displayed during installation. | Building_HeaterWithOffset、PlaceWorker_HeaterWithOffset |
| 12 | Wall-mounted cooler / Wall-mounted vent | Air conditioners mounted on the wall and ventilation openings. The ventilation openings equalize the temperature without allowing people to pass through. | VEF CompProperties_MountableOnWall |
| 13 | Standing cooler | Desktop type. Cools only down to 14°C (freezing not possible). Consumes 13W while idle. | CompHeatPusherPoweredWithIdleDraw |
| 14 | Small / Large ceiling fan | It can only be placed under a roof. It cannot be placed side by side. It cools down to 17°C. The fan rotation speed changes during operation. Small: 30W (standby 3W), Large: 50W (standby 5W) | Building_CeilingFan、CompCeilingFan、PlaceWorker_UnderRoof / NeverAdjacentCeilingFan |
| 15 | Included Proxy Heat (outdoor proximity temperature) | Only a few tiles around outdoor heat and cooling sources change in temperature. Settlers will warm themselves or cool off in these areas. The range is displayed with a red/blue border when selected. | Source/ProxyHeat(ProxyHeat.dll)、CompTemperatureSource |
| 16 | Automatic registration of heat sources | Automatically applies proximity temperature to all buildings, including those with HeatPusher (including mods) and temperature-controlled buildings (output is limited to ±50°C). | Startup.AutogenerateProxyHeatComps |
| 17 | Setting up campfires, passive coolers, and steam vents | Campfires have a radius of 2.5 and +18°C (max 30°C), melting surrounding snow. Passive coolers are -6°C, and steam vents are +30°C. | Patches/Vanilla_Patches.xml |
| 18 | Change in AI behavior | When hypothermia or heatstroke becomes serious, a pawn moves to a cell with a comfortable temperature (near an outdoor campfire, or somewhere cool); frostbite does not count. Cells with dangerous temperatures are also removed from where pawns wander. The temperature readout at the bottom right of the screen and the ambient temperature of things also reflect it. | HarmonyPatches (JobGiver_SeekSafeTemperature, RCellFinder.CanWanderToCell, GlobalControls.TemperatureString, Thing.AmbientTemperature) |
| 19 | Outdoor crop cultivation (optional) | Near a heat source, plants grow even in winter (turned ON in the settings; only on cells where the temperature with the added heat is above 0℃). | Patch_GrowthSeasonNow / GrowthRateFactor_Temperature |
| 20 | Compatible with Gravity Ship (Odyssey) | Heaters have GravshipLaunchExtension (isHeater). Counted as heating for gravity ships (guess). | Buildings_Temperature.xml |